November 22, 2026

Tesla Model Y Launch Edition L in XPEL Stealth and Fusion Plus

Tesla Model Y Launch Edition L in XPEL Stealth satin PPF at Pristine Detail, Edina MN

How we protected a Tesla Model Y Launch Edition L with full XPEL Stealth satin PPF and XPEL Fusion Plus ceramic coating at our Edina shop.

A Tesla Model Y Launch Edition L just received full-coverage protection at our Edina shop: XPEL Stealth paint protection film over the painted body, then XPEL Fusion Plus ceramic coating on top of the film. The factory red now has a smooth satin, almost matte finish, and the paint underneath is shielded from rock chips, road salt, and Minnesota weather.

Here's what we installed, why Stealth and Fusion Plus work well together, and how to care for a satin finish like this.

Rear three-quarter view of a red Tesla Model Y Launch Edition L in XPEL Stealth satin PPF at Pristine Detail in Edina, MN
The Model Y in XPEL Stealth satin PPF after the install at our Edina shop.

The car

The Tesla Model Y is a daily driver for a lot of people in the Twin Cities, a compact electric SUV that spends plenty of time on I-494, I-35W, and salted winter roads. This Launch Edition L came to Pristine Detail in Edina for full protection and a satin look, without a repaint. Red paint has a lot of presence, and a gloss finish shows every swirl. XPEL Stealth changes that by turning a gloss color into a smooth satin or matte look while the original paint stays protected underneath.

What XPEL Stealth PPF is

XPEL Stealth is a satin paint protection film made to help guard painted surfaces against chips, scratches, and stains. You get a custom satin finish that's reversible, and the factory paint stays underneath. To compare film options, start with our paint protection film page, or see more about Stealth PPF.

  • A satin look without a respray. Gloss paint can be converted to a satin or matte appearance with the film. When the film eventually comes off, the original finish is still there.
  • Self-healing clear coat. Stealth has a heat-activated, self-healing clear coat. According to XPEL, light scratches can heal in 20 to 30 minutes at room temperature, and warm water around 120°F can speed that up.
  • Built for real driving. On a full install, the film takes the hit from gravel, road debris, and scuffs that are hard to repair on a satin finish.
  • Backed by XPEL. When it's professionally installed, XPEL offers a 10-year limited warranty on Stealth against manufacturing defects such as yellowing, cracking, blistering, and delamination.
Rear left view of a red Tesla Model Y Launch Edition L in XPEL Stealth satin PPF at Pristine Detail in Edina, MN
The satin finish wraps evenly around the rear quarter, hatch, and side.

Why we added XPEL Fusion Plus on top

Paint protection film does the heavy lifting against chips. A ceramic coating on top of the film is about making the surface easier to live with. After the Stealth install, we applied XPEL Fusion Plus, the version XPEL developed for paint and PPF.

XPEL describes Fusion Plus as a flexible, thin 9H ceramic coating made for paint protection film and painted surfaces. It bonds at a molecular level to help repel dirt and liquids, so the car is easier to clean. XPEL also says it offers hydrophobic protection and improved scratch resistance, and that a ceramic coating on Stealth will not make the satin finish shiny. That last point matters on matte or satin film: you want the water to sheet off without turning the finish glossy.

XPEL notes that Fusion Plus is specifically formulated for Stealth. It helps protect the satin finish from UV rays and environmental damage, and lets water and dirt slide off. It can be applied over XPEL PPF, and XPEL says Fusion Plus will not void the film's warranty. It's a hydrophobic layer, not a substitute for the chip protection the film provides. That's why this Model Y got both: Stealth for impact protection and the satin look, and Fusion Plus to help the film stay cleaner through Minnesota seasons.

You can read more about the coating on our XPEL ceramic coating page.

Built for Minnesota winters

Anyone who drives around Minneapolis or Edina already knows what winter does to a vehicle. Salt, sand, and grit sit on the paint, and rock chips show up on the front bumper, hood, and mirrors. A satin finish is even less forgiving if the paint itself gets damaged, because blending or polishing a matte panel is not like fixing gloss paint.

A full XPEL Stealth install puts a protective film over the painted surfaces, so chips and stains hit the film first. Fusion Plus adds a hydrophobic layer that helps water, dirt, and road film slide off, which makes washing simpler. Together, they help keep a Model Y looking sharp through freeze-thaw cycles, spring gravel, and summer storms.

How to care for satin PPF

Satin and matte film needs a slightly different routine than gloss paint. A few habits will keep this finish even:

  • Give the install time to settle. XPEL recommends waiting 48 hours before the first wash.
  • Hand wash with a pH-neutral soap. Skip household detergents and harsh chemicals.
  • Don't wax or polish the film. Products made to add gloss or cut swirls on regular paint can stain or shine a satin finish in ways you don't want.
  • Be careful with a pressure washer. Keep the wand away from edges and seams so you don't lift the film.
  • Wash regularly, especially in winter, so salt and contaminants don't sit on the surface. If something stains the film, address it sooner rather than later.

Light swirls in the film's clear coat can heal with heat, which is one advantage of Stealth over a painted or vinyl matte finish. If you have questions about aftercare, call the shop and we'll walk you through it.

Rear right view of a red Tesla Model Y Launch Edition L in XPEL Stealth satin PPF at Pristine Detail in Edina, MN
Rear right view of the Launch Edition L in XPEL Stealth and XPEL Fusion Plus.

Want this look on your Tesla?

Whether you drive a Model Y, a Model 3, or another vehicle, we can install XPEL Stealth for a satin finish, clear PPF if you want to keep the factory gloss, and XPEL Fusion Plus ceramic coating over film or paint. See more examples on our Tesla page.

Visit Pristine Detail in Edina

Pristine Detail has protected and detailed cars in the Twin Cities since 2015. Our shop is at 4444 W 76th St in Edina, serving Edina, Eden Prairie, Bloomington, and Minneapolis. Call us at 651-706-9895, or request a quote and tell us about your vehicle. We'll recommend the right protection for how you drive.

Packages Recommended:
No items found.